Here’s the ContractorChem-style rephrased version of Break Wall so it matches the tone and formatting of your other product descriptions:

Break Wall – Superior Water Repelling & Salt Blocking Sealer

Break Wall is a high-performance silane/siloxane blend that delivers exceptional protection against water penetration, salt damage, and freeze/thaw cycles. Using advanced reactive chemistry, it penetrates deep into the surface to provide long-lasting, invisible protection without altering the appearance of your hardscape.

This water-based penetrating sealer is breathable, non-film forming, and ideal for protecting high-use surfaces in both residential and commercial environments.

Note: Due to supply chain changes, Break Wall is the recommended direct replacement for AquaBlocka Sealer from Contractor CHem Group until further notice.

Key Benefits

• Superior Water Repellency – Blocks water and salt infiltration to prevent damage

• Salt & Freeze/Thaw Protection – Extends the life of your surface in harsh climates

• Inhibits Biological Growth – Helps prevent mold, moss, and algae

• Invisible Finish – No change in appearance (some surfaces may darken slightly)

• Breathable Formula – Won’t trap moisture or efflorescence

• Environmentally Friendly – Water-based, LOW VOC, EPA compliant

• Temperature Stable – Freeze-resistant to -60°F (-51°C) and stable up to 180°F (82°C)

Coverage Rate

(Two coats applied wet-on-wet)

• Pavers & Other Hardscape Surfaces: 75–200 sq. ft. per gallon

• Concrete: 100–200 sq. ft. per gallon

• Retaining Walls & Vertical Surfaces: 50–200 sq. ft. per gallon

Applicable Surfaces

Concrete roof tiles • Asphalt shingles • Wood • Granite • Marble • Sandstone • Grout • Mortar • Limestone • Stucco • Brick • Cement • Concrete • Stone

Recommended Applications

Driveways • Walkways & Stairs • Garage Floors • Industrial Flooring • Building Entrances • Shopping Malls • Restaurant Drive-Thrus • Dumpster Pads • Natural Stone (not polished or highly dense like granite or quartz) • Broomed/Plain Concrete • High-use hardscape surfaces needing water and salt protection

Application Tips

• Apply on dry or damp surfaces

• Use two coats wet-on-wet, applying the second coat at right angles to the first

• Use a low-pressure, high-volume sprayer, slit foam roller, and masking supplies

• First coat: ~⅔ of total product; Second coat: ~⅓ of total product

• Coverage will vary by surface type, age, porosity, and conditions

This version keeps Break Wall fully in line with your other ContractorChem product listings while still sounding like a premium, professional-grade product.