ContractorChem® Premium Waterborne Saturating Sealer

Eco-Friendly, Deep-Penetrating Protection for Stone & Concrete

ContractorChem® Premium Waterborne Saturating Sealer is a professional-grade, water-based solution engineered to protect a wide range of natural stone and masonry surfaces—including granite, travertine, limestone, marble, and concrete. It delivers superior oil and water repellency while maintaining the natural look of the surface. The result is long-lasting stain resistance, easy cleaning, and exceptional durability in both indoor and outdoor environments.

Key Benefits

• Permanent Oil & Water Repellency – Chemically bonds deep within the pores to block moisture and stains from oils, food, and contaminants.

• Eco-Friendly & Solvent-Free – Non-toxic, 0% VOC formula safe for people, pets, and plants.

• Superior Breathability – Allows water vapour to escape while preventing liquid penetration, reducing risk of trapped moisture damage.

• Fast Application – Short dwell time between coats for faster job completion.

• Long-Term Protection – Resists alkali damage and UV breakdown; maintains surface appearance for years with minimal maintenance.

• Easier Cleaning – Prevents dirt and biological growth from embedding deep in pores, allowing cleaning without harsh chemicals.

Typical Applications

Ideal for both residential and commercial use:

• Building facades

• Patios & walkways

• Pool surrounds

• Interior floors & walls

• Kitchens & bathrooms

• Garage floors & driveways

Coverage Rate

• Varies by surface porosity – Typical range: 80–200 sq. ft. per liter

• Always apply at least two coats for optimal performance.

Applicable Surfaces

Marble, Sandstone, Fiberboard, Grout, Mortar, Limestone, Hardboard, Stucco, Brick, Cement, Concrete, Stone, Asphalt Shingles, Concrete Roof Tiles

Application Instructions

1. Preparation – Remove all dirt, dust, and organic matter. Clean thoroughly with ContractorChem® EffBomb cleaner at the recommended dilution.

2. Drying – Ensure surfaces are completely dry before sealing.

3. Test Area – Apply in a small, inconspicuous spot to confirm desired appearance and coverage rate.

4. Apply Sealer – Use a brush, roller, or sprayer to apply an even coat. Allow short dwell time, then apply the second coat while the first is still damp.

5. Remove Excess – Wipe away any puddling or residue with clean, dry cloths.

6. Cure Time – Protect from water and traffic for 24–48 hours for best results.